Friday, May 31, 2013

Xubuntu and Samba share

When I move to Xubuntu, I do miss the easy of setting up SAMBA share folder.  However, this can easily be fixed by installing: system-config-samba

After installing the package, extra option will present in the Settings, and sharing a folder is few clicks away.

Wednesday, May 22, 2013

Xubuntu no sound

Recently, I have noticed my netbook has no sound.  It seems this is caused by the auto mute feature in alsa.  This can be switched off by using the alsamixer utiltiy.

sudo alsamixer


Wednesday, May 15, 2013

Xubuntu, KVM and Display Resolution


If you are like me who use a KVM switch to control multiple computers, you may run into resolution problem with Ubuntu.

Since the computer is not being connected to the monitor directly, it may not get the DDC information from the monitor to set the resolution correctly.  In my case, I was stuck at 1024x768@60KHz.

A quick google search brought me to this nice post that helps me get pass the 1024x768.

https://www.tecmint.com/set-display-screen-resolution-in-ubuntu/

Here are few quick notes on steps I took.

1) Use cvt   1920   1080 to produce a modeline, e.g.

# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
2) Then made this available for selection

xrandr --newmode "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
 Use xrandr to get the ID for your display, e.g. VGA-1
$ xrandr
 
 
$ xrandr --addmode VGA-1 "1920x1080_60.00"

3) Test the new resolution option by using your system Display setting tool, e.g.




If the setting works for you, then you can make this permanent by adding a little profile file to /etc/profile.d/, e.g.


$ sudo vim /etc/profile.d/external_monitor_resol.sh
Within this file, just add the two xrandr lines you were using earlier, e.g.



xrandr --newmode "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
xrandr --addmode VGA-1 "1920x1080_60.00"



Now restart your system.  The new resolution should stay if things are done correctly.

 

Edited 2021-04-22:

It seems there is a simpler alternative.

1) Use xrandr to find out the supported resolutions, e.g.

 


2) In my case, 1920x1080@60 is the resolution I am aiming for.  Now, edit the grub file to tell the kernel about this resolution by adding video=1920x1080@60 as a parameter to the GRUB_CMDLINE_LINUX_DEFAULT option like below:





3) Run update-grub to apply the settings

After reboot, this new resolution should now be available to the system.

 

ref: https://askubuntu.com/questions/973499/wayland-how-to-set-a-custom-resolution